Charging cable

Mitsubishi Outlander PHEV Forum

Help Support Mitsubishi Outlander PHEV Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Andy1234

Member
Joined
Nov 16, 2015
Messages
19
Hi, I have a problem with my Type 1 to Type 2 cable. Last year it stopped working and I traced it to the integrated micro switch which I replaced and all has been fine since until this week when yet again it stopped working. So I've checked it over with my multi meter but can't find anything obvious that is wrong with it this time. Anyway as the micro switches are cheap I decided to change it again in the hope it may work but to no avail. Tried it again today and the charging post says something about it can't detect the plug?

One thought I've had is whether there is a chance the resistors have gone bad, but just checked and the colours would suggest a 330 and 150 resistors which does check out with tje multimeter so I'm assuming they're ok.

Does anyone have any suggestions on this?
 
Back
Top