Mitsubishi Outlander PHEV Forum

It is currently Tue Oct 23, 2018 6:12 am

All times are UTC - 8 hours [ DST ]




Post new topic Reply to topic  [ 3 posts ] 
Author Message
 Post subject: Alloys and offsets
PostPosted: Tue Jun 12, 2018 11:48 am 
Offline

Joined: Tue Jun 12, 2018 3:18 am
Posts: 28
Hi,

Ive got a good deal on a set of 4 OZ Ultraleggera 7x16" ET45. However, Ive got 2 questions in mind:

Would they fit or are they too close to the inside compared to stock 6.5x16" ET38 ?

I read (in the OZ users manual) that those wheels are limited to a 560kg (iirc) load. Should I really avoid putting them on the 2 ton PHEV?


Top
 Profile  
 
 Post subject: Re: Alloys and offsets
PostPosted: Wed Jun 13, 2018 9:02 am 
Offline

Joined: Mon Dec 16, 2013 1:18 pm
Posts: 3627
Location: Netherlands
I would not use them on the PHEV. They probably will not break, but as the maximum loaded weight of the PHEV exceeds the wheel rating, you might get into trouble with the MOT/Law/insurance.

_________________
www.jaapvphotography.eu
www.l-camera-forum.com


Instyle+ 2013
Titanium Grey
Off-white leather
Body kit
Protection kit
TPMS
Skidplates


Top
 Profile  
 
 Post subject: Re: Alloys and offsets
PostPosted: Wed Jun 13, 2018 11:02 am 
Offline

Joined: Tue Jun 12, 2018 3:18 am
Posts: 28
Should I stick to OEM 16" alloys? There’s some at 80 AUD each but I’ll have to find a transporter that can make them travel by sea, else it’s absurdly expensive


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 8 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
© Mitsubishi Outlander PHEV Forum - part of the MyElectricCarForums.com Group