Removed the tail light today

I met with an accident last Friday,and got my new light yesterday.
Replaced with the new light.
I thought of disassembling the damaged light.
I wanted to see the LED rear stop light REMOVED!
but that isn't a easy task for me,I removed all the screws and nothing is removable?
Any ideas,experience about this?

The outer combination lamp comes off if you pull hard (after removing the screws!!)
The lamp on the tailgate needs a tool to pry out the clips from the side, you can se a hole for the tool or use a screewdriver.

BR//Per-Anders

paa451843 said:

The outer combination lamp comes off if you pull hard (after removing the screws!!)
The lamp on the tailgate needs a tool to pry out the clips from the side, you can se a hole for the tool or use a screewdriver.

BR//Per-Anders

Click to expand...

Tried my best,
But the outer light(red plastic cover) doesn't come out.
Is there anything to heat?
Like phone displays?

NS633 said:

paa451843 said:

The outer combination lamp comes off if you pull hard (after removing the screws!!)
The lamp on the tailgate needs a tool to pry out the clips from the side, you can se a hole for the tool or use a screewdriver.

BR//Per-Anders

Click to expand...

Tried my best,
But the outer light(red plastic cover) doesn't come out.
Is there anything to heat?
Like phone displays?

Click to expand...

You have to pull the whole unit towards the rear, se capter 54b:
http://mmc-manuals.ru/manuals/outlander_iii/online/Service_Manual_2013/2016/index_M1.htm