obiuquido144
Posts: 18
Joined: Fri Aug 02, 2019 3:28 pm

Re: Triple Procedure & Setup (Costs around 80USD)

Tue Aug 13, 2019 5:32 am

Pro tip: before reset make sure you back up your BMU data for a potential restore using special function 'Write learned value (change ECU) - Learning value Read & save". This creates a LNDxxxxx.log file in C:\MUT3_SE\Temp\LNDDATA directory. The backup, to my knowledge, contains more information than the two values that can be written using the manual fallback procedure (Sum total time, i.e. battery secular age, and Chrg&dischrg integrated current, i.e. cycles - which is incorrectly referred to as "Travel distance” in the menu).

Once you do that can you please PM me and generously send me your backup :oops: :lol:

Regarding my comment about DBCAM slots, I've since learned from the documentation that the newest measurement always takes the top position, pushing all others down, i.e. there is no risk of running out of data slots.

kolyandex
Posts: 5
Joined: Thu Jul 18, 2019 4:55 pm
Location: Novosibirsk, Russia
Contact: Website

Re: Triple Procedure & Setup (Costs around 80USD)

Tue Aug 27, 2019 7:37 pm

Hello all. I'm an author of this driver. If you have a questions - welcome. :shock:

Darkflow
Posts: 37
Joined: Fri Jul 07, 2017 11:59 pm

Re: Triple Procedure & Setup (Costs around 80USD)

Tue Aug 27, 2019 11:46 pm

kolyandex wrote:Hello all. I'm an author of this driver. If you have a questions - welcome. :shock:
Hello. Thanks for your work on the driver and for making it available.

Do you have a recommendation for which J2534 cable to get? I was planning on a generic $10 - $15 one from AliExpress.

kolyandex
Posts: 5
Joined: Thu Jul 18, 2019 4:55 pm
Location: Novosibirsk, Russia
Contact: Website

Re: Triple Procedure & Setup (Costs around 80USD)

Thu Aug 29, 2019 9:15 pm

Darkflow wrote: Do you have a recommendation for which J2534 cable to get? I was planning on a generic $10 - $15 one from AliExpress.
For simple operation Mini-VCI works well. For harder (writing variant coding) - Tactrix Openport 2.0 preferred.

michael8554
Posts: 227
Joined: Wed Jul 31, 2019 8:16 am

Re: Triple Procedure & Setup (Costs around 80USD)

Fri Aug 30, 2019 6:01 am

Hi Nikolay

There are three "Driver J2534 Pass-Thru" on your link.

8000, 3000, and 1000 Rouble.

Which one is required for the Triple Procedure please?

I have managed to reset with the Diode Method, but would like to do it again "correctly"
2014 3H, 20K Miles
Bought June 2019
podPOINT 16Amp EVSE
Wiltshire UK

ScottyDont
Posts: 24
Joined: Sun Mar 20, 2016 10:16 pm
Location: Port Macquarie

Re: Triple Procedure & Setup (Costs around 80USD)

Sat Aug 31, 2019 2:31 pm

kolyandex wrote:
Darkflow wrote: Do you have a recommendation for which J2534 cable to get? I was planning on a generic $10 - $15 one from AliExpress.
For simple operation Mini-VCI works well. For harder (writing variant coding) - Tactrix Openport 2.0 preferred.

That's great news, I already have a tactrix to flash my RX8 ecu.
2014 Outlander PHEV, Amethyst Black, Towbar and Mats

Mitch
Posts: 155
Joined: Wed Oct 31, 2018 2:23 am
Location: Munich, Germany
Contact: Website

Re: Triple Procedure & Setup (Costs around 80USD)

Sun Sep 01, 2019 3:04 am

I can confirm, the driver is working perfect!
Also I can confirm, with a Mini VCI you are able to read all values and do some simple task like DBCAM, but no coding.
Greetings
Markus :)

2019 Top

kolyandex
Posts: 5
Joined: Thu Jul 18, 2019 4:55 pm
Location: Novosibirsk, Russia
Contact: Website

Re: Triple Procedure & Setup (Costs around 80USD)

Sun Sep 01, 2019 8:06 am

michael8554 wrote:Hi Nikolay

There are three "Driver J2534 Pass-Thru" on your link.

8000, 3000, and 1000 Rouble.

Which one is required for the Triple Procedure please?

I have managed to reset with the Diode Method, but would like to do it again "correctly"
For this Mini-VCI and 3000 ruble driver is enough.

michael8554
Posts: 227
Joined: Wed Jul 31, 2019 8:16 am

Re: Triple Procedure & Setup (Costs around 80USD)

Sun Sep 01, 2019 11:36 am

Thankyou.

I will order the drivers when I get the mini VCI and get it checked out as good.
2014 3H, 20K Miles
Bought June 2019
podPOINT 16Amp EVSE
Wiltshire UK

ScottyDont
Posts: 24
Joined: Sun Mar 20, 2016 10:16 pm
Location: Port Macquarie

Re: Triple Procedure & Setup (Costs around 80USD)

Thu Sep 19, 2019 1:56 pm

Ordered the driver and Nikolay responded very quickly. I have only read the BMU data so far but there has been no compatibility issues with a genuine tactrix openport 2.0 and x64 windows 10.
2014 Outlander PHEV, Amethyst Black, Towbar and Mats

Return to “Technical Discussions”