sportster
Posts: 5
Joined: Wed Oct 02, 2019 7:05 am

Re: Triple Procedure & Setup (Costs around 80USD)

Wed Oct 02, 2019 1:16 pm

Did somebody run the "J2534 Pass-Thru" driver in combination with a mini VCI cable and the MUT III Software successfully on Windows 10 (32-bit or 64-bit) or is an old Windows 7 (32-bit) system required?

Mitch
Posts: 155
Joined: Wed Oct 31, 2018 2:23 am
Location: Munich, Germany
Contact: Website

Re: Triple Procedure & Setup (Costs around 80USD)

Wed Oct 02, 2019 1:21 pm

Yes
Greetings
Markus :)

2019 Top

kolyandex
Posts: 5
Joined: Thu Jul 18, 2019 4:55 pm
Location: Novosibirsk, Russia
Contact: Website

Re: Triple Procedure & Setup (Costs around 80USD)

Wed Oct 02, 2019 8:48 pm

sportster wrote:Did somebody run the "J2534 Pass-Thru" driver in combination with a mini VCI cable and the MUT III Software successfully on Windows 10 (32-bit or 64-bit) or is an old Windows 7 (32-bit) system required?
Both of 32 and 64 and XP, 7, 8, 10 are supported.

sportster
Posts: 5
Joined: Wed Oct 02, 2019 7:05 am

Re: Triple Procedure & Setup (Costs around 80USD)

Wed Oct 02, 2019 11:36 pm

Thank you for your feedback! I intend to order a mini VCI cable and Nikolay's driver and will try to get the MUT III software working on my laptop on Windows 10 64-bit.

sportster
Posts: 5
Joined: Wed Oct 02, 2019 7:05 am

Re: Triple Procedure & Setup (Costs around 80USD)

Thu Oct 03, 2019 12:18 pm

Nikolay,

I suppose your "J2534 Pass-Thru" driver is relying on the driver provided by the mini VCI cable vendor. However, until now I only found cable vendors explicitely stating that they only support 32-bit Windows.

Is my assumption regarding your driver correct? If yes, do you have a recommendation for a mini VCI cable which is compatible with your driver and can be used on 64-bit Windows?

Thank you.

kolyandex
Posts: 5
Joined: Thu Jul 18, 2019 4:55 pm
Location: Novosibirsk, Russia
Contact: Website

Re: Triple Procedure & Setup (Costs around 80USD)

Tue Oct 08, 2019 7:18 pm

sportster wrote:Nikolay,
I suppose your "J2534 Pass-Thru" driver is relying on the driver provided by the mini VCI cable vendor. However, until now I only found cable vendors explicitely stating that they only support 32-bit Windows.
Is my assumption regarding your driver correct? If yes, do you have a recommendation for a mini VCI cable which is compatible with your driver and can be used on 64-bit Windows?
Thank you.
32-bit applications will also work with 64-bit OS. My driver support 64-bit OS'es. All J2534 adapters i know use 32-bit DLL's for work with 3-rd part programs.

michael8554
Posts: 227
Joined: Wed Jul 31, 2019 8:16 am

Re: Triple Procedure & Setup (Costs around 80USD)

Wed Oct 09, 2019 12:50 am

I have seen online workarounds for the mini VCI on 64 bit systems.
2014 3H, 20K Miles
Bought June 2019
podPOINT 16Amp EVSE
Wiltshire UK

KWh
Posts: 82
Joined: Fri May 03, 2019 12:32 pm
Location: The Hague, Netherlands

Re: Triple Procedure & Setup (Costs around 80USD)

Wed Oct 09, 2019 1:56 pm

As I'm curious by nature, I've been checking some of the links in this topic, although it seems a bit early to start fiddling with the battery software (hope I never have to).

I do wonder. Is it possible to turn off one or more of the "helpfull" warning sounds in the coding?

I fully understand the use of some of them, but they have really gone overboard with the beeps and blings. Of course I knew this buying the car (and did sleep over it, beïng a possible deal breaker), so can't complain. If it can be turned of though :mrgreen:
MY2020 Outlander PHEV Instyle
Polar white, P-line black leather

Soon to be charged by 14 solar panels

sportster
Posts: 5
Joined: Wed Oct 02, 2019 7:05 am

Re: Triple Procedure & Setup (Costs around 80USD)

Wed Oct 16, 2019 11:03 pm

I have problems installing the MUT-III Software on my system. The „MUT-III CANBus Database“ installation step aborts with the messages „Instance does not exist“ and „Aquisition of a item went wrong“.

I’m using freshly installed Windows 10 Home 32-bit Version 1903.

Afterwards I tried to install the SQL Server 2014 Express download package provided by Microsoft separately. This did not resolve the problem.

I’m trying MUT-III 2018 Build PRE18091-00.

See attached screenshots. Any suggestions?
You do not have the required permissions to view the files attached to this post.

sportster
Posts: 5
Joined: Wed Oct 02, 2019 7:05 am

Re: Triple Procedure & Setup (Costs around 80USD)

Fri Oct 18, 2019 2:46 am

Update: I resolved this issue.

We need MUT 3 SE, not the whole MUT 3 package. Thus aborting the installation at the stage above is not a big problem.

I successfully installed MUT 3 SE by executing Mut3check.exe from the „MUT-3 SE" subdirectory of the MUT-3 installation folder. The destination directory was „C:\MUTSW\MUT3SE", thus I had to modify Nikolay's „!Fix MUT-III SE.bat" file to update this directory.

Return to “Technical Discussions”