michael8554
Posts: 236
Joined: Wed Jul 31, 2019 8:16 am

MINI-VCI and Toyota Techstream

Sat Sep 28, 2019 12:13 pm

I want to test my mini vci is installed correctly before I shell out 60 bucks for the Nikolay Fedeev drivers for MUT 3.

Will the Toyota Techstream software get data from the PHEV, or do I need the Fedeev drivers to get Techstream to work?
2014 3H, 20K Miles
Bought June 2019
Rolec 32Amp EVSE
Wiltshire UK

michael8554
Posts: 236
Joined: Wed Jul 31, 2019 8:16 am

Re: MINI-VCI and Toyota Techstream

Wed Oct 02, 2019 10:24 am

I installed the mini-VCI and Toyota Techstream V13 as directed by a video on the installation CD.

Got as far as plugging into the car, opening Techstream, hitting "connect to vehicle", entered the long registration key......

Then nothing.

So to answer my own question, Toyota Techstream does nothing on the PHEV, only the mini-VCI installation is required as a step to running MUT-3 with the Feedev drivers?

Under USB Controllers in Device Manager there is:
Vehicle Interface Module
DENSO Windriver
and in COM ports:
USB Serial Port COM 3, FTDI, no errors.
2014 3H, 20K Miles
Bought June 2019
Rolec 32Amp EVSE
Wiltshire UK

jaapv
Posts: 4634
Joined: Mon Dec 16, 2013 1:18 pm
Location: Netherlands

Re: MINI-VCI and Toyota Techstream

Wed Oct 02, 2019 10:31 am

Umm... did you notice that Toyota and Mitsubishi are different brands?
Instyle 2019
Titanium Grey
Before:
Instyle+ 2013

michael8554
Posts: 236
Joined: Wed Jul 31, 2019 8:16 am

Re: MINI-VCI and Toyota Techstream

Wed Oct 02, 2019 10:58 am

Of course I noticed that Techstream is branded Toyota.

But it's OBD2 software, so it could work to some degree with any car, which is why I queried in the first place.

What would be helpful is confirmation that only the connection to the mini-VCI is required to drive MUT-3.
2014 3H, 20K Miles
Bought June 2019
Rolec 32Amp EVSE
Wiltshire UK

EarlVadim
Posts: 3
Joined: Sun Jun 21, 2020 11:45 pm

Re: MINI-VCI and Toyota Techstream

Sat Jul 04, 2020 10:48 pm

Also, you can use Mini-VCI with MUT-III SE through MUT-Config (for Win32 only). It's cheaper..
But, OpenPort2(clone) is better, then Mini-VCI.

Return to “Technical Discussions”