Mitsubishi Outlander PHEV Forum
https://www.myoutlanderphev.com/forum/

Some cosmetic upgrades for 2018 Outlander PHEV
https://www.myoutlanderphev.com/forum/viewtopic.php?f=11&t=4080
Page 2 of 2

Author:  yardbird88 [ Wed May 15, 2019 2:40 pm ]
Post subject:  Re: Some cosmetic upgrades for 2018 Outlander PHEV

Where did you order the pedal set from?[/quote]


https://www.aliexpress.com/wholesale?ca ... +pedal+set

Pick the one without drilling. I had it for almost a year already...no problem.

Author:  minical [ Fri May 24, 2019 8:46 pm ]
Post subject:  Re: Some cosmetic upgrades for 2018 Outlander PHEV

yardbird88 wrote:
Where did you order the pedal set from?



https://www.aliexpress.com/wholesale?ca ... +pedal+set

Pick the one without drilling. I had it for almost a year already...no problem.[/quote]

Thanks for the link. The ones on there are only the pedals - where did you get that rest plate? I'm actually more concerned about getting that rest plate, as it is just carpet and the OEM rubber mats do not cover it so it gets dirty really quickly.

Thanks!

Author:  yardbird88 [ Sat May 25, 2019 11:29 am ]
Post subject:  Re: Some cosmetic upgrades for 2018 Outlander PHEV

minical wrote:
yardbird88 wrote:
Where did you order the pedal set from?



https://www.aliexpress.com/wholesale?ca ... +pedal+set

Pick the one without drilling. I had it for almost a year already...no problem.


Thanks for the link. The ones on there are only the pedals - where did you get that rest plate? I'm actually more concerned about getting that rest plate, as it is just carpet and the OEM rubber mats do not cover it so it gets dirty really quickly.

Thanks![/quote]
https://www.google.com/search?q=2018+Mi ... rc=_&vet=1



Here you go. There are different footrest to choose from. I picked the footrest with screws so it can be attached to the carpet base. The pedal set is without screws because I don't want to drill holes into the metal. They fit pretty tight with the rubber just like the OEM's rubber pedal.

Author:  yardbird88 [ Sun Jun 16, 2019 12:35 am ]
Post subject:  Re: Some cosmetic upgrades for 2018 Outlander PHEV

Finally got the time to install the OEM led sill plates at the front. It's a pain in the a##. The manufacturer did not pre-wire the hardness for the lighted sill plates so I got to follow the instruction and tapped into the ECU & door switch. It took me 3 hours because lots of panels to remove under the dash. The dealer wants $275 in labor to install so I did it myself.

Author:  minical [ Tue Jun 18, 2019 7:36 am ]
Post subject:  Re: Some cosmetic upgrades for 2018 Outlander PHEV

Looking good!

@yardbird88 did you get your spoiler off aliexpress as well? I was looking at them earlier but some people were complaining theirs got damaged during shipping.

How's the fit and finish of the one you got?

Author:  yardbird88 [ Tue Jun 18, 2019 3:13 pm ]
Post subject:  Re: Some cosmetic upgrades for 2018 Outlander PHEV

minical wrote:
Looking good!

@yardbird88 did you get your spoiler off aliexpress as well? I was looking at them earlier but some people were complaining theirs got damaged during shipping.

How's the fit and finish of the one you got?


The rear spoiler I got was OEM from the dealer....$240. It involved drilling holes! into the new outlander so it is not going anywhere. The Chinese aftermarket spoiler although look bigger only use 3m adhesive...not sure I want that.

https://www.oem-mitsubishiparts.com/oem ... gKFjfD_BwE

The led sill plates are OEM Mitsubishi parts made in China for the local Outlanders in China with the same part # as USA. I got it on sale from Taobao.com, a Chinese counterpart of Aliexpress for ONLY $58 plus about $12 shipping. It was a close-out sale. US dealer is asking for over $350 for the same stuff.

https://item.taobao.com/item.htm?spm=a1 ... 2jhlb356a4

Page 2 of 2 All times are UTC - 8 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/