What's the best way to wash you vehicle?

Mitsubishi Outlander PHEV Forum

Help Support Mitsubishi Outlander PHEV Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

NS633

Well-known member
Joined
Jun 25, 2016
Messages
132
I've been experiencing various scratches and dried soap marks on my previous vehicle when I let it dry after a wash.
What's the best way to wash the vehicle?
Using a pressure washer or just an ordinary wash?
How do you wash?and what are the differences in both of this ways?
Any new way of washing the vehicle?
 
I've been using hydro2 for nearly 4 years and it is amazing. They have a new product called hydrofoam which is better as you save about 10 minutes when applying. My car is kept in a garage and the product lasts at least 4 months. I use RODI water to rinse and the car dries spot free. Doing the whole car with hydrofoam takes less that 15 minutes and protects everything, paint, glass, wheels, rubber etc.

Best advise is do not let product dry, keep wet and blast off with good pressure hose or water blaster.

https://www.youtube.com/watch?v=B2aJtrK12Ms
 
vs2 said:
I've been using hydro2 for nearly 4 years and it is amazing. They have a new product called hydrofoam which is better as you save about 10 minutes when applying. My car is kept in a garage and the product lasts at least 4 months. I use RODI water to rinse and the car dries spot free. Doing the whole car with hydrofoam takes less that 15 minutes and protects everything, paint, glass, wheels, rubber etc.

Best advise is do not let product dry, keep wet and blast off with good pressure hose or water blaster.

https://www.youtube.com/watch?v=B2aJtrK12Ms







Nice product! And nice to see that you too have a RUBY BLACK Outlander! :D
But I couldn't find this product on EBAY.
Where can I buy it?
 
Not sure what Country you are in but you can get it in the UK.

https://carpro.uk.com/products/hydrofoam-wash-and-coat-hydro2-snow-foam

In the tradition of our Hydro2 line HydroFoam was formulated with Hydrophilic glass fibers, fluoropolymers and can be applied to all solid vehicle surfaces! Paint, glass, plastic, wheels, calipers, and wheel wells are all easily within reach with HydroFoam. This amazing rich foam wash and sealant in one lifts the dirt whilst in the Merino wiping stage and then during the rinse phase an ultra-water-repellent coating is immediately formed!

This results in a durable silica shell that produces a brilliant protected shine that is incredibly easy to maintain. Our "Hydroelectric bonding" function means the pressure from spraying with water accelerates the bonding of the glass like shell to the surface creating a unique glossy coat that is resistant to nearly all acids, alkaline solutions, and solvents while offering significant UV protection.
 
Back
Top