Mitsubishi Outlander PHEV Forum

It is currently Tue Nov 12, 2019 12:50 pm

All times are UTC - 8 hours [ DST ]




Post new topic Reply to topic  [ 70 posts ]  Go to page Previous  1 ... 3, 4, 5, 6, 7  Next
Author Message
 Post subject: Re: Triple Procedure & Setup (Costs around 80USD)
PostPosted: Tue Aug 13, 2019 5:32 am 
Offline

Joined: Fri Aug 02, 2019 3:28 pm
Posts: 18
Pro tip: before reset make sure you back up your BMU data for a potential restore using special function 'Write learned value (change ECU) - Learning value Read & save". This creates a LNDxxxxx.log file in C:\MUT3_SE\Temp\LNDDATA directory. The backup, to my knowledge, contains more information than the two values that can be written using the manual fallback procedure (Sum total time, i.e. battery secular age, and Chrg&dischrg integrated current, i.e. cycles - which is incorrectly referred to as "Travel distance” in the menu).

Once you do that can you please PM me and generously send me your backup :oops: :lol:

Regarding my comment about DBCAM slots, I've since learned from the documentation that the newest measurement always takes the top position, pushing all others down, i.e. there is no risk of running out of data slots.


Top
 Profile  
 
 Post subject: Re: Triple Procedure & Setup (Costs around 80USD)
PostPosted: Tue Aug 27, 2019 7:37 pm 
Offline

Joined: Thu Jul 18, 2019 4:55 pm
Posts: 5
Location: Novosibirsk, Russia
Hello all. I'm an author of this driver. If you have a questions - welcome. :shock:

_________________
MMCodingWriter - free tool for manage coding and diagnostics on Mitsubishi vehicles


Top
 Profile  
 
 Post subject: Re: Triple Procedure & Setup (Costs around 80USD)
PostPosted: Tue Aug 27, 2019 11:46 pm 
Offline

Joined: Fri Jul 07, 2017 11:59 pm
Posts: 32
kolyandex wrote:
Hello all. I'm an author of this driver. If you have a questions - welcome. :shock:


Hello. Thanks for your work on the driver and for making it available.

Do you have a recommendation for which J2534 cable to get? I was planning on a generic $10 - $15 one from AliExpress.


Top
 Profile  
 
 Post subject: Re: Triple Procedure & Setup (Costs around 80USD)
PostPosted: Thu Aug 29, 2019 9:15 pm 
Offline

Joined: Thu Jul 18, 2019 4:55 pm
Posts: 5
Location: Novosibirsk, Russia
Darkflow wrote:
Do you have a recommendation for which J2534 cable to get? I was planning on a generic $10 - $15 one from AliExpress.


For simple operation Mini-VCI works well. For harder (writing variant coding) - Tactrix Openport 2.0 preferred.

_________________
MMCodingWriter - free tool for manage coding and diagnostics on Mitsubishi vehicles


Top
 Profile  
 
 Post subject: Re: Triple Procedure & Setup (Costs around 80USD)
PostPosted: Fri Aug 30, 2019 6:01 am 
Offline

Joined: Wed Jul 31, 2019 8:16 am
Posts: 98
Hi Nikolay

There are three "Driver J2534 Pass-Thru" on your link.

8000, 3000, and 1000 Rouble.

Which one is required for the Triple Procedure please?

I have managed to reset with the Diode Method, but would like to do it again "correctly"

_________________
2014 3H, 20K Miles
Bought June 2019
podPOINT 16Amp Charger
Wiltshire UK


Top
 Profile  
 
 Post subject: Re: Triple Procedure & Setup (Costs around 80USD)
PostPosted: Sat Aug 31, 2019 2:31 pm 
Offline

Joined: Sun Mar 20, 2016 10:16 pm
Posts: 24
Location: Port Macquarie
kolyandex wrote:
Darkflow wrote:
Do you have a recommendation for which J2534 cable to get? I was planning on a generic $10 - $15 one from AliExpress.


For simple operation Mini-VCI works well. For harder (writing variant coding) - Tactrix Openport 2.0 preferred.



That's great news, I already have a tactrix to flash my RX8 ecu.

_________________
2014 Outlander PHEV, Amethyst Black, Towbar and Mats


Top
 Profile  
 
 Post subject: Re: Triple Procedure & Setup (Costs around 80USD)
PostPosted: Sun Sep 01, 2019 3:04 am 
Offline

Joined: Wed Oct 31, 2018 2:23 am
Posts: 137
Location: Munich, Germany
I can confirm, the driver is working perfect!
Also I can confirm, with a Mini VCI you are able to read all values and do some simple task like DBCAM, but no coding.

_________________
Greetings
Markus :)

2019 Top


Top
 Profile  
 
 Post subject: Re: Triple Procedure & Setup (Costs around 80USD)
PostPosted: Sun Sep 01, 2019 8:06 am 
Offline

Joined: Thu Jul 18, 2019 4:55 pm
Posts: 5
Location: Novosibirsk, Russia
michael8554 wrote:
Hi Nikolay

There are three "Driver J2534 Pass-Thru" on your link.

8000, 3000, and 1000 Rouble.

Which one is required for the Triple Procedure please?

I have managed to reset with the Diode Method, but would like to do it again "correctly"

For this Mini-VCI and 3000 ruble driver is enough.

_________________
MMCodingWriter - free tool for manage coding and diagnostics on Mitsubishi vehicles


Top
 Profile  
 
 Post subject: Re: Triple Procedure & Setup (Costs around 80USD)
PostPosted: Sun Sep 01, 2019 11:36 am 
Offline

Joined: Wed Jul 31, 2019 8:16 am
Posts: 98
Thankyou.

I will order the drivers when I get the mini VCI and get it checked out as good.

_________________
2014 3H, 20K Miles
Bought June 2019
podPOINT 16Amp Charger
Wiltshire UK


Top
 Profile  
 
 Post subject: Re: Triple Procedure & Setup (Costs around 80USD)
PostPosted: Thu Sep 19, 2019 1:56 pm 
Offline

Joined: Sun Mar 20, 2016 10:16 pm
Posts: 24
Location: Port Macquarie
Ordered the driver and Nikolay responded very quickly. I have only read the BMU data so far but there has been no compatibility issues with a genuine tactrix openport 2.0 and x64 windows 10.

_________________
2014 Outlander PHEV, Amethyst Black, Towbar and Mats


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 70 posts ]  Go to page Previous  1 ... 3, 4, 5, 6, 7  Next

All times are UTC - 8 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
© Mitsubishi Outlander PHEV Forum - part of the MyElectricCarForums.com Group