First off - thanks to BCBackRoader for taking the risk of trying the kit and sharing his experience with me. This was helpful!
I bought the first kit off ebay from "Rising Tuning", however it was lost in the mail and never arrived after 4 months.
I re-ordered a different kit from Tema4x4 which arrived promptly in 3 weeks. Both kits were from Russia.
They have 2 models, one is made from hard PolyUrethane, the other "polymer" coated steel. I bought the steel ones. I'm concerned about rust as we salt our roads here in BC Canada, so I re-sprayed them with a couple layers of additional paint on top of the paint that was there.. some of the original coating was damaged in shipping.
Quick take on the install (done by a local shop here in BC) - the front camber kit is definitely needed if you want negative camber up front (recommended) and I have to order the rear SPC 67455 camber kit for the back as we could not get it negative on the rear.
Post install ride quality is like OEM. Very happy with the results. I did not measure the before/after ground clearance though, but I'll try to get out and measure it soon after it's settled (does it settle LoL?) and provide results.
Wheels are Mitsubishi OEM BBS from the Evo X MR (18 x 8.5, 18.5lbs forged ultra light!) and Tires are 235/60/18 G015 (again thanks BCBackRoader for your tire research and feedback).