Wheel Spacers ？

[Andixu]

What size would you all recommend that goes great with the BONOSS wheel spacers? I’m a newbie so all the information I can get will be appreciated!

[KJ78]

Why do you want to run wheel spacers to begin with? What is your end goal here?

Are you running wheels that are a different offset/width than the factory wheels and are wanting to correct the fitment, or are you running the factory wheels and just want a wider stance?

I have 19mm (3/4") spacers installed on mine, this was to correct the fitment from the higher +ve offset wheels I purchased as well as to get a slightly wider stance to compensate a bit for the larger tires and eventual lift kit.

Whichever spacer you decide on, make sure it is a hubcentric one so the wheel can be mounted correctly and the weight is carried by the wheel hub and not the lugnut studs.

Spacers beyond 12mm thick will usually come with their own set of pressed in studs that the wheel mounts to, with the spacer bolting onto the factory studs, spacers less than 1" thick will require you to cut your factory studs because they will stick out too far beyond the mounting face on the spacer blocking the wheel from being installed correctly.

[jaapv]

The car weighs nearly two tons - fitting wheel spacers will throw quite a bit of extra strain on the wheel bearings - not wise.

[Sharkins]

What size would you all recommend that goes great with the BONOSS wheel spacers? I’m a newbie so all the information I can get will be appreciated! https://www.casinobooks.net/

need a little more information to help you choose

[ThudnBlundr]

need a little more information to help you choose

I think they may have moved on - their original post was 6 months ago

[Sharkins]

mb you`re right
https://onlinecasinosguide.net/