MonsterPHEVs
Member
Hey all thought I'd share a mistake somebody might learn from.
Purchased 30mm PU strut spacer kit. Happily I tried to install the front first and found that the RHS drive shaft rests on the LCA with the hub only about 20mm lower than standard full droop. So a 30mm push could be disastrous.
From other posts I can see these kits have been fitted to PHEVs, so may be an issue only for later models.
Purchased 30mm PU strut spacer kit. Happily I tried to install the front first and found that the RHS drive shaft rests on the LCA with the hub only about 20mm lower than standard full droop. So a 30mm push could be disastrous.
From other posts I can see these kits have been fitted to PHEVs, so may be an issue only for later models.