After having alot of problem with the "Outlander PHEV" android App I was finally able to make it work on 2 different phone, Blackberry PRIV (Android 6) and Motorola G6 Play (Android 9) after reading from the thread in the technical sub-forum https://www.myoutlanderphev.com/forum/v ... =10&t=3380
and from the official mitsubishi diagnostic page I came up with this procedure which allow you to use the app when you want.
here's an update on how I made it work:
1- Turn on "Air plane mode"
2- Reactive WiFi
2b- Make sure "location service" is ON (at least for pairing as newer version now require this. You wont find the car wifi in the app without this and will only see a white screen when selecting wifi)
3- Launch the "PHEV app"
4- use the app all you need (Synchronis it with the car Wifi if it's the first time you use it)
5- VERY IMPORTANT - leave the app by using the "back button", if the app spin for more than 2-3 secondes re-open the app and close it again using the "back button" (this force the app to close the WiFi connection to the car)
6- Deactivate the "air plane mode"
7- close the app like you would close any other app as the app stays in background.
8- user your phone like you would normally do.
Repeat when you need to use the app,
I know that this is a real pain but at least it work as long as you follow these step you don't need to forgot your home WiFi, just follow these steps each time you want to use the app.
I just sent this information to my sale guy as apparently not many people know how to make this app work.
Edit: added step 2b about location service.